File Transfer By Programmable Controller Cpu (Get) - Mitsubishi Electric MELSEC Q Series User Manual

6 FUNCTIONS

6.7.5 File transfer by programmable controller CPU (GET)

6 - 103
This section explains the FTPGET instruction used to transfer a file with a sequence
program.
FTP server
1) Head I/O number of Web server module
2) Control data (transfer source No., file name, etc.)
Set the transfer source FTP server preset in the FTP setting, the file name to be
transferred, etc.
3) Completion bit
(1) File transfer by sequence program
The following explains the method of transferring a file by a sequence program.
Refer to Section 8.4 for details of the FTPGET instruction.
Instruction
M10 M11
M11
User data file
Read
Create control data in D70 and later.
Transferred.
ZP.FTPGET
Processing after transfer completion
Processing after transfer failure
MELSEC-Q
1) 2)
ZP.FTPGET (S)
"Un"
I/O No.
Web server module
"U0" D70 M10
3)
(D)
6 - 103