Mitsubishi Electric MELSEC Q Series User Manual page 316

6 FUNCTIONS
6 - 93
(b) After login to the Web server module, write the user HTML file on the
personal computer to the USER directory of the Web server module so that
normal file operation using Explorer is available.
File can be transferred by
drag and drop.
(5) Precautions for using the FTP server function
(a) It is required to end the FTP operation once and restart connection to FTP
from the beginning if a wrong user name or password is entered to FTP,
due to the restrictions on the FTP client side application.
Even when the correct user name or password is entered to "user" of the
FTP command, FTP may not operate normally.
(b) The maximum number of simultaneous connections to the FTP server is 10.
However, since several internal connections may be made simultaneously
depending on the FTP client, login may not be allowed if 10 connections
are not reached apparently.
(c) If many files are transferred at once by FTP, a 426 (Data connection error)
error may occur.
In that case, transfer the files not at once but several times.
(d) When a file of the Web server module is overwritten via FTP, the file will be
deleted if an error occurs during write of the file.
Write the file again via FTP.
(e) In the case of FTP access by the Internet Explorer
screen may not be displayed depending on the Internet Explorer
specifications.
In this case, enter the Web server module address as follows:
ftp://<User name>:<Password>@<Web server module address or host
name>/
(Example) In the case of factory setting:
ftp://QJ71WS96:MITSUBISHI@192.168.3.3/
MELSEC-Q
®
, the user authentication
®
's
6 - 93