System Setting - Mitsubishi Electric MELSEC Q Series User Manual

4 SET-UP AND PROCEDURE BEFORE OPERATION

4.6.3 System setting

Item
Network type setting
IP address setting
DNS server setting
Web server setting
FTP server setting
System name setting
Network diagnosis setting
Automatic network connection
setting at start-up
Save
Cancel
4 - 33
[Setting Purpose]
Makes the initial setting required for the Web server module to connect to the
network.
Be sure to make this setting to use the Web server module.
[Start Procedure]
[Administrative menu]
[Setting Screen]
[Setting Item]
Sets the connection method of the Web server module to the network.
Sets the IP address for the Web server module.
Sets the IP address for the DNS server.
Sets the HTTP port number for the Web server module.
Sets the FTP port number of the Web server module.
Sets the system name.
Sets whether network diagnoses (ping) will be executed or not.
Set whether automatic network connection will be made or not at a start.
Saves the settings.
The settings are updated when the programmable controller is powered off and then on,
or the CPU module is reset.
Discards new data and return to the old setting.
"System setting"
Description
MELSEC-Q
4 - 33