Mitsubishi Electric MELSEC Q Series User Manual page 149

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 25
(4) Accessing the Web server module from the personal computer
(a) Start the Web browser from the personal computer and enter the address
of the Web server module as indicated below.
[http://192.168.3.3/]
(b) As the user authentication screen ("Enter Network password " screen)
appears when accessing the Web server module, enter the following.
User name
Password
(c) The standard screen appears on the Web browser.
(Example) In the case of Internet Explorer
POINT
If access to the Web server module fails, first issue the PING command from the
personal computer to the Web server module to check the existence of the Web
server module.
Refer to Section 6.11.3 for how to issue the PING command.
: QJ71WS96 (All in uppercase)
: MITSUBISHI (All in uppercase)
MELSEC-Q
®
5.5
4 - 25