9 TROUBLE SHOOTING
Error
Error name
code
SMTP server login
0815h
error
E-mail header send
0816h
error
E-mail main text send
0817h
error
0818h
Attached file send error
SMTP server logout
0819h
error
E-mail sending not
081Ah
possible
9 - 41
Error definition
Failed to connect to the mail
server (SMTP server).
Failed to send the e-mail header.
Failed to send the e-mail main
text.
Failed to send the attached file.
Failed to disconnect from the mail
server (SMTP server).
In switch setting, an e-mail
sending request was issued during
default operation.
(From the previous page)
Corrective action
Check the E-mail setting.
(Refer to Section 6.6.3)
Check the connection with the
mail server.
Check the mail server status of
the send destination.
Power on the programmable
controller a few minutes after
power-off.
Check whether the Internet
service provider in use meets the
specification. (Refer to Section
2.4 (8))
Select "This server has
authentication requirements
which have to be met" in the e-
mail setting, and set each item.
(Refer to Section 6.6.3.)
Check the connection with the
mail server.
Check the mail server status of
the send destination.
Check the connection with the
mail server.
Check the mail server status of
the send destination.
Check the connection with the
mail server.
Check the mail server status of
the send destination.
Check the logging setting.
(Refer to Section 6.6.5 (3).)
Check the connection with the
mail server.
Check the mail server status of
the send destination.
Reset the default operation
setting of the switch setting.
(Refer to Section 4.7)
(Continued on the next page)
MELSEC-Q
Error type
Continue
Continue
Continue
Continue
Continue
Continue
9 - 41