Mitsubishi Electric MELSEC Q Series User Manual page 330

6 FUNCTIONS
6 - 107
(2) User name
(a) The user name who made access is displayed.
(b) Set the user name in the account setting.
(Refer to Section 4.6.5 for the account setting.)
(3) Operation
The following table explains the operations performed for access.
Item
HTTP login
HTTP login failure
Data write
System setting
Dial-up setting
Access target CPU setting Access target CPU setting was made.
Tag setting
Logging setting
FTP setting
E-mail setting
Event setting
Address notification
setting
Account setting
IP filter setting
CF backup
CF restore
CF format
CSV export
CSV import
Setting update
FTP login
FTP login failure
(4) Source IP address
The IP address of the access source is displayed in decimal.
(Example) 192. 168. 3. 1
(5) Precautions for using the access log function.
Depending on the version of Java VM, HTTP login access may be registered
every time communication occurs.
Registration to the access log can be inhibited in "Intelligent function module
switch setting". (Refer to Section 4.7.)
Login to the Web server was executed.
Login to the Web server failed.
Write to device data or write to tag data was performed.
System setting was made.
Dial-up setting was made.
Tag setting was made.
Logging setting was made.
FTP setting was made.
E-mail setting was made.
Event setting was made.
Address notification setting was made.
Account setting was made.
IP filter setting was made.
Data was backed up by the CompactFlash card.
Data was restored from the CompactFlash card.
CompactFlash card was formatted.
Setting data was exported to a CSV file.
Setting data was imported from a CSV file.
Setting were updated.
Login to the FTP server was executed.
Login to the FTP server failed.
MELSEC-Q
Description
6 - 107