Mitsubishi Electric MELSEC Q Series User Manual page 214

5 CONNECTING WEB SERVER MODULE TO NETWORK
Item
Connection method
Connection account
Access point
Dial method
Retry
Modem attribute
5 - 12
(5) Access to Web server module
(a) Start a Web browser on the personal computer and enter the Web server
module address obtained by the address notification function.
(b) When the user authentication screen is displayed at the time of access to
the Web server module, enter the account. (Setting in (2) 5))
User name
Password
(c) The standard screen is displayed in the Web browser.
REMARKS
When using a modem for connection, make the dial-up setting as shown below.
For other than the following, the setting is the same as the one for ADSL.
: administrator001
: (example) QJ71WS96ADMIN
Select "Modem".
Enter the account obtained from the Internet service provider.
Enter the access point of the Internet service provider.
 Point phone number 1
Select "Tone".
Set the number of retries to "3" times.
Set the communication specifications between the Web server
module and the modem.
 Communication speed
 Calling timeout
 CALL function
 Disconnect function
MELSEC-Q
Set value
: (example) 000111222
: 115200 bps
: 100 seconds
: Enable
: Enable, 5 minutes
5 - 12