Network Setting Of Personal Computer For One-To-One Connection - Mitsubishi Electric MELSEC Q Series User Manual

4 SET-UP AND PROCEDURE BEFORE OPERATION

4.5 Network Setting of Personal Computer for One-to-one Connection

4 - 11
Connect the Web server module with the personal computer on a one-to-one basis,
and set the Web server module from the Web browser on the personal computer.
This section explains the network setting of the personal computer when the Web
server module and personal computer are connected on a one-to-one basis.
(1) System configuration for one-to-one connection
Web server module
(2) Network setting of personal computer
(a) Set the personal computer and the Web server module to the same
network address.
Network
IP address 192.168.3.
255.255.255.
Subnet mask
Web server module
Crossing cable
Personal computer
Set the same value.
Host Network
3 192.168.3.
0 255.255.255.
personal computer
MELSEC-Q
Set different
values
Host
1
0
4 - 11