Mitsubishi Electric MELSEC Q Series User Manual page 541

APPENDICES
SERIES OTHER STATION
SINGLE
QCPU
DIFFERENT
SINGLE
QCPUA
DIFFERENT
SINGLE
LCPU
DIFFERENT
SINGLE
QNACPU
DIFFERENT
SINGLE
ACPU
DIFFERENT
App - 37
1 When other than "QCPU" is selected at SERIES, "NO" cannot be set.
Doing so will result in an error.
2 The following restrictions apply to the setting values of NET1 and NET2, depending
on a combination of the setting items. If a value other than those that can be set is
set, an error occurs.
NET1
There is no restriction.
There is no restriction.
"ETHERNET", "C24", and
"CCIEFIELD" cannot be set.
"CCLINK" and "C24" cannot be set.
"NET10" and "ETHERNET" cannot be
set.
There is no restriction.
"CCIEFIELD" cannot be set.
"CCLINK" and "C24" cannot be set.
"ETHERNET", "C24", and
"CCIEFIELD" cannot be set.
"CCLINK" and "C24" cannot be set.
NET2
1. When "NET10", "ETHERNET", or
"CCIEFIELD" is selected at "NET1",
"NET10", "ETHERNET", and "CCIEFIELD"
cannot be set.
2. When "CCLINK" or "C24" is selected at
"NET1", "CCLINK" and "C24" cannot be set.
The following items cannot be set:
 "NET10"
 "ETHERNET"
 "CCIEFIELD"
 "C24"
1. The following items cannot be set:
 "NET10"
 "ETHERNET"
2. When "NET10", "ETHERNET", or
"CCIEFIELD" is selected at "NET1",
"CCIEFIELD" cannot be set.
3. When "CCLINK" or "C24" is selected at
"NET1", "CCLINK" and "C24" cannot be set.
The following items cannot be set:
 "NET10"
 "ETHERNET"
 "CCIEFIELD"
 "C24"
The following items cannot be set:
 "NET10"
 "ETHERNET"
 "CCIEFIELD"
 "C24"
MELSEC-Q
App - 37