File Transfer By Programmable Controller Cpu (Put) - Mitsubishi Electric MELSEC Q Series User Manual

6 FUNCTIONS

6.7.4 File transfer by programmable controller CPU (PUT)

6 - 100
This section explains the FTPPUT instruction used to transfer a file with a sequence
program.
1)
ZP.FTPPUT
"Un"
I/O No.
Web server module
1) Head I/O number of Web server module
2) Control data (transfer destination No., tag/logging No., etc.)
Set the transfer destination FTP server set in the FTP setting, the
tag/logging data of the file to be transferred, etc.
3) Completed bit
4) File
Tag data/logging data/user data file
(1) File transfer by sequence program
The following explains the method of transferring a file by a sequence program.
Refer to Section 8.3 for details of the FTPPUT instruction.
Instruction
M2 M3
M3
2) 3)
(S) (D)
Transfer destination No.
Tag/Logging No.
File name
Create control data in D20 and later.
Transferred
ZP.FTPPUT
Processing after transfer completion
Processing after transfer failure
MELSEC-Q
(4) File (.BIN/.CSV)
Tag/Logging
data, user
data file
"U0" D20 M2
FTP server
6 - 100