Mitsubishi Electric MELSEC Q Series User Manual page 155

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 31
(2) Saving the Administrative menu settings
(a) On setting screens of the Administrative menu, change the settings and
then click on the "Save" button.
(b) Clicking on the "Save" button writes the new settings over the set data of
the Web server module. (The old data before overwrite are lost.)
Web server module
Standard ROM
POINT
On setting screens of the Administrative menu, make sure to click on the "Save"
button after changing the settings.
Switching to another screen or ending the Web browser before clicking on the
"Save" button deletes the new settings.
(3) Updating the Administrative menu settings
(a) Update on the Setting update screen
1) Click on the "Update" button on the Setting update screen to update
the settings on the Web server module.
2) In the following message box, confirm that the settings have been
updated.
Writing set data
Overwriting set data
MELSEC-Q
Web browser
Standard screen Administrative menu
Save
Change the setting and
click on the "Save" button.
4 - 31