Mitsubishi Electric MELSEC Q Series User Manual page 479

9 TROUBLE SHOOTING
Error
Error name
code
UPnP router detection
0341h
fault
UPnP faulty response
0342h
detected
034Fh System error
0360h IP filter setting file fault
0361h System error
Standard ROM format
0400h
error
0401h
System error
0402h
0430h CF card absence error
0431h CSV export error
0432h Import file error
0433h Label error
0435h Out of range error
9 - 24
Error definition
Failed to detect the UPnP router.
An error response was received
from the UPnP router.
The IP filter setting file does not
exist or is corrupted.
Data cannot be written to the
standard ROM.
(The standard ROM has no free
space.)
The CF card has not been set.
The CF card does not have
sufficient free space or is
corrupted.
There are not all CSV files
necessary for import, or there is a
file that cannot be read.
The label that must be set does
not exist.
The item value is outside the
setting range or the item does not
exist.
(From the previous page)
Corrective action
 Check whether the UPnP router
is powered on.
 Check the cable connected to up
to the UPnP router.
 Confirm that the router supports
UPnP.
 Check whether the UPnP router
is connected to WAN (Internet).
 Power on the Web server module
when the UPnP router is ready.
 System error ( 1)
 After initializing the module
(refer to Section 4.13), make IP
filter setting (refer to Section
4.6.6) again.
 System error ( 1)
 Delete unnecessary files by FTP
operation and re-execute.
(Refer to Section 6.7)
 System error ( 1)
 Set the CF card and re-execute.
 Delete unnecessary files on the
CF card, or set another CF card
and execute CSV export again.
(Refer to Section 6.10.4.)
 Add the file displayed in Status
on the data management screen,
and execute CSV import again.
(Refer to Section 6.10.4.)
 Add a necessary label to the file
displayed in Status on the data
management screen, and
execute CSV import again.
(Refer to Section 6.10.4,
Appendix 6.)
 Check the item of the file
displayed in Status on the data
management screen, and
execute CSV import again.
(Refer to Section 6.10.4,
Appendix 6.)
(Continued on the next page)
MELSEC-Q
Error type
Continue
Continue
Stop
Stop
Stop
Continue
Stop
Display
Display
Display
Display
Display
9 - 24