Micromeritics TriStar II 3020 Operator's Manual page 349

TriStar II 3020
g.) BJH Cumulative Desorption
h.) Adsorption Total Pore Volume
i.) Desorption Total Pore Volume
j.) t-Plot Micropore Pore Volume
See t-Plot calculations
k.) Dubinin-Radushkevich Micropore Surface Area
See Dubinin-Radushkevich calculations
l.) Dubinin-Radushkevich Monolayer Capacity
See Dubinin-Radushkevich calculations
m.) Dubinin-Astakhov Micropore Surface Area
See Dubinin-Astakhov calculations
n.) Dubinin-Astakhov Micropore Volume
See Dubinin-Astakhov calculations
o.) MP-Method Cumulative Surface Area of Pores
MPS = S
TOT
MP-method Calculations, and the range of hydraulic pore radii over which the cumulative
surface area was computed.
p.) MP-Method Cumulative Pore Volume of Pores
MPV = V
TOT
MP-method calculations, and the range of hydraulic pore radii over which the cumulative
pore volume was computed.
q.) Average Pore Hydraulic Radius (A)
=
MP
DAVER
302-42828-01 - Dec 2012
, (see MP-method Calculations) for the last collected data point used in the
CUM I
, (see MP-method calculations) for the last collected data point used in the
CUM I
MPV
6 – 3 10
TOT
--------------------- -  
10 /cm 10
m
MPS
TOT
Å/m
Appendix C
C-41