Starting The Setup Program - Micromeritics TriStar II 3020 Operator's Manual

Installing the Software

Starting the Setup Program

To start the setup program:
1. Ensure that the analysis program is not operating and the analyzer is idle.
2. Insert the setup CD into the CD-ROM drive. The setup program starts automatically.
If the program does not start automatically, navigate to the CD drive and double-click the
setup.exe file.
3. The Welcome screen displays. Click
4. On the Select Task screen, select the task to perform, then click
to complete the selected task.
4-10
.
Next
TriStar II 3020
. Use the following sections
Next
302-42828-01 - Dec 2012