Krypton Analysis - Micromeritics TriStar II 3020 Operator's Manual

TriStar II 3020
8. When the analysis is complete, remove the sample tube and store (or dispose) of the sample
material as applicable.
Use caution when removing the sample tube if using a hanging filler rod. The sample
tube O-ring or Dewar cover may snag the filler rod retaining ring. Loosen the snag
gently; excessive force may break the tip of the filler rod.

Krypton Analysis

This applies only to units with the Krypton option installed.
Use the Krypton Analysis method when performing up to three analyses using Krypton as the adsorp-
tive gas.
1. Select Unit [n] > Krypton Analysis.
2. The remaining instructions for Krypton Analysis are the same as
beginning with Step 2.
302-42828-01 - Dec 2012
Performing an Analysis
Analysis, page
Sample 3-25
3-27