Brake Lamp/Tail Lamp Replacement (6X6) - Polaris Sportsman 800 EFI 4x4 2012 Service Manual

Brake Lamp/Tail Lamp Replacement (6X6)

The tail lamp (A) and stop lamp (B) are located in the
rear tail lamp housing.
1. Remove the screws (C) holding the tail lamp
assembly to the box and pull out.
2. To remove either of the bulbs, turn the holder
assembly 1/4 turn and pull out.
3. Replace the bulb. Install the holder assembly and
apply 1/4 turn to lock in place. Refer to the parts
manual for the correct bulb part number.
4. Reinstall the tail lamp assembly. Install the screws
and tighten sufficiently.
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
ELECTRICAL
10
10.39