Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 117

16. Install camshaft thrust plate (G) with new bolts.
Torque bolts to specification.
NOTE: New bolts have patch lock on the threads
and do not require Loctite®
Thrust Plate Screw:
115 ± 12 in-lbs (13 ± 1.35 Nm)
17. Assemble rotors as marked when disassembled.
Use a cleaner to remove the marks previously made
on the rotors.
18. Apply assembly lube or oil to the rotors on the oil
19. Align the bolt holes and install oil pump assembly
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
pump shaft.
NOTE: The application of lubrication aids in
priming the oil pump during initial engine start
up.
into crankcase. Rotate the rotors in the housing
during installation, as this checks for binding if new
rotors are used.
NOTE: For assembly of the gears, the cam gear
and the crankshaft gear are stamped with "This
Side Out." This indicates the side of the gear that
faces outward or away from the case.
Before assembly, clean the bolts and bolt holes
with Primer N (PN 2870585) to remove any
debris. This will ensure proper sealing when
installing bolts and new Loctite®
ENGINE
3
3.57