Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 116

ENGINE
14. Position cylinder and piston assemblies onto the
connecting rods and push the piston pins through the
piston and connecting rods.
3.56
15. Install the piston pin circlips (F). The circlip ends
should be installed at the 12 O'clock position.
IMPORTANT:
cover all engine passages. The clip could fall into
the engine during installation.
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
While installing in piston pins,