Assembly - Polaris Sportsman 800 EFI 4x4 2012 Service Manual

Assembly

1. Reinstall the chain onto the front output shaft and
rear output shaft.
2. Install front and rear output shafts into the case.
3. Before installing the cover make sure the sealing
4. Reinstall the thrust button shim, thrust button, and
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
TRANSMISSION
surfaces are clean and dry, and shafts are fully
seated in the transmission case. Apply Crankcase
Sealant (PN 2871557) to the mating surfaces.
other shims into the cover. Reinstall cover and
torque bolts in a criss-cross pattern in 3 steps to
specification.
NOTE: Verify case locating pins (knock pipes)
are in place.
Cover Bolt:
27-34 ft-lbs (36.5-46 Nm)
Torque in Sequence
8
8.33