Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 352

TRANSMISSION
Gear Cluster Disassembly
20. Remove the bearing from the reverse shaft using a
bearing puller. Slide the engagement dog off of the
reverse shaft (see Figure 8-1).
21. Remove the retaining ring and washer from the
reverse shaft (see Figure 8-1).
22. Remove the bearing from the input shaft using a
bearing puller (see Figure 8-1).
23. Remove the 33T gear and needle bearing from the
reverse shaft (see Figure 8-1).
8.12
24. The reverse shaft should slide out of the silent chain
to separate the assembly.
25. Remove the rest of the ball bearings from each shaft.
26. Disassemble the other end of the reverse shaft.
Remove the retaining ring, washer, gear and needle
bearing from the reverse shaft (see Figure 8-2).
27. Remove the washer, retaining ring and engagement
dog from the reverse shaft (see Figure 8-2).
28. Remove the retaining ring, washer, 38T sprocket and
needle bearing from the reverse shaft (see Figure 8-
2).
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.