Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 123

36. Secure the gear/stator housing cover (O) to the
crankcase with the cover bolts. Torque bolts in
proper sequence to specification. Remove seal
protectors from the shaft ends once secure.
Gear/Stator Housing Bolt:
96 ± 3 in-lbs (10.85 ± 0.35 Nm)
*Torque in proper sequence
NOTE: Before assembly, clean the bolts and bolt
holes with Primer N (PN 2870585) to remove any
debris. This will ensure proper sealing when
installing bolts.
37. Install shaft seal with ceramic surface facing inward.
38. Install water pump impeller (P). Secure the impeller
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
with the washer and a new nylok nut (Q). Torque
the nut to specification.
Water Pump Impeller Nut:
108 in-lbs (6.8 Nm)
ENGINE
3
3.63