Table of Contents
Advertisement
4. Secure the fuse box cover and access panel.
5. Secure the front box cover.
LIGHTS
Poor lighting can result in reduced visibility when driving. Headlight and taillight
lenses become dirty during normal operation. Clean headlights frequently and
Always make sure lights are adjusted properly for best visibility.
HEADLIGHT LAMP REPLACEMENT
When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from
your skin leaves a residue, causing a hot spot that will shorten the life of the
lamp. If fingers do touch a lamp, clean it with denatured alcohol.
Hot components can cause burns to skin. Allow lamps to cool before servicing.
1. Remove the seven (7) headlight pod screws. Pull the pod cover forward.
2. Unplug the headlamp from the wiring harness. Be sure to pull on the
connector, not on the wiring.
3. Turn the lamp counter-clockwise to remove it.
4. Apply dielectric grease to the socket and install the new lamp. Make sure the
tab on the lamp locates properly in the housing.
5. Reassemble the pod.
LED HEADLIGHT REPLACEMENT (IF EQUIPPED)
On models equipped with LED headlights, if the headlights become inoperable,
the entire assembly must be replaced by your authorized Polaris dealer or other
qualified service facility.
replace burned out headlamps promptly.
CAUTION
CAUTION
MAINTENANCE
145
Advertisement
Table of Contents
