FINAL DRIVE
7. Install the input shaft cover assembly, bolts and
bracket. Torque to specification.
Input Cover Bolt:
7-11 ft-lbs (9.4-14.9 Nm)
8. Install a new seal (1) in the outer cover plate
assembly. Install a new o-ring on the backlash pad
(2) stem .
NOTE: Ring gear backlash (2) is set at the
factory. No adjustment is required, unless the
front cover is replaced or the back lash pad
screw is removed.
7.36
9. Install the roll cage and rollers into the ring gear.
Insert the rollers as the roll cage is installed.
10. Install the output hub (1) and ring gear/roller cage
assembly (2).
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.