Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 252

CLUTCHING
6. Inspect the helix on the moveable sheave.
7. Remove the inner spring retainer from the inner
sheave. Inspect for wear and replace as needed.
8. Check the rollers in the stationary sheave for wear. If
rollers are worn, a new driven clutch assembly may
be needed.
6.36
9. Inspect the bearings inside the moveable sheave.
Moveable Sheave Bearing Inspection:
Replace the bearing if more brass than Teflon® is
10. Inspect the Teflon® coating on the moveable sheave
bearings.
11. Inspect driven clutch sheave faces for wear or
damage.
12. Clean and inspect splines on helix and transmission
input shaft.
13. Lube splines with a light film of grease. Do not
lubricate the bearings!
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
visible on the bearing.