Crankshaft Position Sensor (Cps) Replacement - Polaris Sportsman 800 EFI 4x4 2012 Service Manual

Crankshaft Position Sensor (CPS)
Replacement
1. Disconnect sensor harness connector.
2. Using a 6 mm hex wrench, remove the retaining bolt
and replace the sensor, using a light coating of oil on
the o-ring to aid installation.
3. Torque the retaining bolt to specification.
CPS Retaining Bolt:
25 in-lbs (2.8 Nm)
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
FUEL SYSTEM - GENERAL
4
4.25