Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 257

8. Remove the clutch assembly from the holding tool.
9. Press out the spring pins (I) in the inner sheave.
10. Pull out the clutch roller pins (J) and rollers (K).
11. Press the shaft and bearing out of the outer sheave
using an arbor press.
12. Inspect the bearing for wear. Spin the bearing, if the
13. Inspect the cam (helix) assembly bushing for wear. If
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
bearing does not spin smoothly, replace it. To
replace the bearing, remove the snap ring from the
end of the shaft and press the bearing off the shaft.
the bushing is worn or the shaft does not fit snug into
the bushing, replace the cam (helix) assembly.
CLUTCHING
6
6.41