Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 283

12. Be sure the armature plate tabs are fully engaged
into the roll cage assembly and are resting on the
cut-grooves of the ring gear.
NOTE: Verify armature plate tabs are in the slots
on the roll cage and are resting in the ring gear
grooves.
13. Install the output hub and cover plate assembly with
a new o-ring (arrow) onto the gearcase.
NOTE: Verify the square O-ring (arrow) is placed
flat on the cover surface. If the O-ring is twisted,
fluid leaks may occur.
14. Torque the cover plate bolts to specification.
15. Lay the gearcase on the side with the output cover
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
Output Cover Bolt:
9 ft-lbs (12 Nm)
facing up.
FINAL DRIVE
7
7.17