Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 109

31. Carefully press the gear off the assembly while
supporting the housing assembly.
CAUTION
Wear appropriate safety gear during this procedure.
Protective gloves, clothing and eyewear are required.
32. Remove the snap ring from the assembly. Place the
housing in a support and press out the bearing/shaft
assembly.
33. Place the shaft in a press to remove the bearing.
34. Press shaft into the new bearing.
35. Press the bearing/shaft assembly using the bearing's
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
Discard original bearing
outer race. Do not use the shaft to press the
assembly into the housing, as bearing damage may
result. Install retaining ring.
ENGINE
3
3.49