Initial Priming / Starting Procedure - Polaris Sportsman 800 EFI 4x4 2012 Service Manual

Initial Priming / Starting Procedure

NOTE: The Injection system must be purged of all
air prior to the initial start up, and/or any time the
system has been disassembled.
If the EFI system is completely empty of fuel or has been
disassembled and repaired:
1. Cycle the key switch from "OFF" to "ON" 6 times,
waiting for approximately 3 seconds at each "ON"
cycle to allow the fuel pump to cycle and shut down.
2. Once step 1 is completed, turn the key switch to
"START" until the engine starts or 5 seconds has
passed.
3. If the engine failed to start, repeat step 1 for 2 more
cycles and attempt to start the engine.
If the engine fails to start, a problem may still exist,
and should be diagnosed.
IMPORTANT: Accurate
components is recommended
Polaris Diagnostic Software (dealer only).
testing of EFI
utilizing the
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
FUEL SYSTEM - GENERAL
4
4.11