Ethernet Connectors; Neutrik Opticalcon Connectors - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
4. Installation 4. Installation
4.3.6. Ethernet Connectors
Standard RJ45 Connector
UBEX F-series endpoint devices provide standard RJ45 connectors for LAN and user Ethernet
access. Always use high quality Ethernet cable.
Neutrik etherCON Connector
UBEX R-series endpoint devices provides Neutrik etherCON NE8FDV-YK connector for LAN
and user Ethernet access.

ATTENTION! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S*
cables.
Wiring of LAN Cables
Lightware recommends the termination of LAN cables on the basis of TIA/EIA T 568 A or TIA/EIA T 568 B
standards.
Top
Pin TIA/EIA T568A
1
2
3
4
5
6
7
8
Wiring of LAN cables by types
WARNING!
Never connect non-assembled CATx cable to the port while the unit is powered, it may
damage the device.
Bottom Side
Wire color TIA/EIA T568B Wire color
white/green white/orange
green orange
white/orange white/green
blue blue
white/blue white/blue
orange green
white/brown white/brown
brown brown
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
4.3.7. Neutrik opticalCON Connectors
UBEX R-series endpoint devices are built with singlemode or multimode Neutrik opticalCON connectors.
Number of
connectors
Connector
drawing
Connector type
Type of the SFP+
module inside
the enclosure
Mode
Supported cable
Number of
required optical
cables for 20GbE

ATTENTION!
(A-A; B-B) cables. Please use standard (A-B) cable only.
See the details about the maximum fiber cable extensions in the
See the more details about the cabling between the Neutrik optical connectors and the SFP+ modules
installed in a F-series endpoint in the
UBEX-PRO20-HDMI-R100 models
2 2 1
NO2-4FDW-A
Module A:
1x Finisar
FTLX2072D327
2x Finisar 2x Finisar
FTLX8574D3BCL FTLX1475D3BCL
Module B:
1x Finisar
FTLX2072D333
Multimode Singlemode Singlemode
LC, Neutrik LC, Neutrik LC, Neutrik
opticalCON opticalCON opticalCON
DUO DUO DUO
1x Neutrik
2x Neutrik opticalCON DUO /
opticalCON DUO
4x LC simplex / 2x LC duplex
/ 2x LC simplex
The 2xSM-BiDi-DUO model does not support the Neutrik opticalCON DUO crossed fiber wiring
R-series Endpoint
Connection between F-series and R-series Endpoints
35 35
1 1
NO4FDW-A
2x Finisar 2x Finisar
FTLX8574D3BCL FTLX1475D3BCL
Multimode Singlemode
Neutrik Neutrik
opticalCON opticalCON
QUAD QUAD
1x Neutrik opticalCON QUAD
section.
section.