Crosspoint / Port Control Menu - Lightware HDMI-3D-OPT-TX210A User Manual


  
5. Software Control - Lightware Device Controller
Change IP Address
To modify IP address settings quickly it is not necessary to enter the device's
settings/network menu, you can set them by clicking the pencil icon beside
the IP address.
You can see the new settings only in this window.
Step 3. Select the unit from the discovered Ethernet devices or under Serial devices; when the device is
connected through RS-232 click on the Query button next to the desired serial port to display the
device's name and serial number. Double click on the transmitter or select the device and click on the
Connect button.
ATTENTION! Before the device is connected via the local RS-232 port, make sure that Control mode and
LW3 protocol are set on the serial port.
Serial devices tab in LDC
USB tab in LDC
HDMI-3D-OPT series – User's Manual
5.3. Crosspoint / Port Control Menu
2
3
4
1 Main menu
2 Information ribbon
Video input ports
3
4 Audio input ports
5 Advanced view
Audio output ports
6
7 Video output ports
1
The available menu items are displayed. The active one is showed with
dark grey background color.
The label shows the device label which can be edited in the
Settings menu - Status tab. Device discovery window can be displayed by
clicking on this ribbon.
Each tile represents a video input port. The tile below the port shows the
current crosspoint setting; if the port is switched to the output, the color of
the tile is white, otherwise grey.
Each tile represents an audio input port. The tile below the port shows
current crosspoint setting; if the port is switched to the output, the color
of the tile is white, otherwise grey. Dark grey means the audio port is not
allowed to embed in the current video input port.
Displaying the Advanced View Window, showing the Terminal window and
the LW3 protocol tree.
The audio output of the optical link and local HDMI out ports. Clicking on
the tile opens the Digital Audio Outputs port properties window.
The video output of the optical link and local HDMI out ports. Clicking on
the tile opens the Video Outputs port properties window.
28
7
6
5