Audio Presets - Lightware MMX8x4-HT Series User Manual


  
8. LW3 Programmers' Reference
8.8.4.9. Set the Delay Time on Analog Audio Out
Command and Response
SET•/MEDIA/AUDIO/O6.Delay=<delay_time>
Ý
pw•/MEDIA/AUDIO/O6.Delay=<delay_time>
Ü
Parameters
<delay_time> The delay time is between 0 and 25 ms.
Example
Ý SET /MEDIA/AUDIO/O6.DelayTime=10
Ü pw /MEDIA/AUDIO/O6.DelayTime=10
For more details about the Delay time see
8.8.4.10. Equalizer (EQ) Settings on Analog Audio Out
Command and Response
SET•/MEDIA/AUDIO/O6.<eq_nr>Gain=<gain_value>
Ý
pw•/MEDIA/AUDIO/O6.<eq_nr>Gain=<gain_value>
Ü
Parameters
Identifier
<eq_nr> PEQ1: Low (100 Hz)
PEQ2: Lmid (400 Hz)
PEQ3: Hmid: (1.6 kHz)
PEQ4: High: (8 kHz)
<gain_value> The EQ gain value can be set between -18dB and +18dB, in step of 3.00 dB.
The value is rounded down if necessary to match with the step value. For more
details, see
Example
Ý SET /MEDIA/AUDIO/O6.PEQ1Gain=-16.00
Ü pw /MEDIA/AUDIO/O6.PEQ1Gain=-15.00
For more details, see Equalization (EQ)
Legend of Advanced Analog Output Channel
Parameter values
Equalization (EQ) Settings.
Settings.
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
MMX8x4-HT series – User's Manual
8.8.5. Audio Presets
8.8.5.1. Save a Preset
Command and Response
Ý CALL /PRESETS/MICADDON/<ch>:savePreset(<index>,<target_node>,<name>)
Ü mO /PRESETS/MICADDON/<ch>:savePreset
Parameters
Identifier
<ch>
section.
<index>
<target_node>
<name>
Example
Ý CALL /PRESETS/MICADDON/MICIN:savePreset(6,I9,first_mic)
Ü mO /PRESETS/MICADDON/MICIN:savePreset
8.8.5.2. Load a Preset
Command and Response
Ý CALL /PRESETS/MICADDON/<ch>:loadPreset(<index>,<target_node>)
Ü mO /PRESETS/MICADDON/<ch>:loadPreset
Parameters
See the legend in the previous section.
Example
Ý CALL /PRESETS/MICADDON/MICIN:loadPreset(7,I9)
Ü mO /PRESETS/MICADDON/MICIN:loadPreset
Parameter
Parameter values
description
Audio channel MICIN: Microphone Input
LINEIN: Advanced Analog Audio Input
HDMIIN: Embedded Audio Input
LINEOUT: Advanced Analog Audio Output
Memory slot ID 1-8: It defines which memory slot to save a preset.
Audio port I9: Microphone Input (when the
number I10: Advanced Analog Audio Input (when the
I11: Embedded Audio Input (when the
O6: Advanced Analog Audio Output (when the
Preset name Up to 16 characters are allowed to name a Preset. Letters (A-Z and a-z),
hyphen (-), underscore (_), and numbers (0-9) are accepted.
Factory default names: User 1-8
118
<ch> parameter is MICIN)
<ch> parameter is LINEIN)
<ch> parameter is HDMIIN)
<ch> parameter is LINEOUT)