Advanced Analog Input Channel; Legend Of Embedded Or Advanced Input Channel - Lightware MMX8x4-HT Series User Manual


  
5. Software Control – Lightware Device Controller
6.7.9. Advanced Analog Input Channel
This settings refers to the advanced analog audio signal.
t
r
e
w
q
1 3
4
5
7
8
9
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
MMX8x4-HT series – User's Manual
6.7.10. Legend of Embedded or Advanced Input Channel
Channel name Displays the channel name. All the settings below belongs to the channel.
1
Digital audio Drop-down menu for selecting the digital audio channel. For more details see
2
selector menu Audio Selector Menu
3 Phase invert button It inverts the phase of the input signal.
Preset button Clicking on this button opens a Channel Preset window where the channel presets can be
4
saved, loaded or deleted. For more details see
Gain section GAIN setting is for increase (or decrease) the input signal level, expressed in dB. For more
5
information see
Sampling frequency It shows the sampling frequency of digital audio.
6
display
HPF button/LPF High-pass filter lets pass the audio signals above 100Hz frequency. Click on the button to
7
button toggle turn it on and off.
Low-pass filter lets pass the audio signals under 15kHz frequency. Click on the button to
toggle turn it on and off.
EQ section: The equalizer section is for set the proper rate of the different frequencies (high: 8kHz;
8
HIGH, HMID, LMID, high-mid: 1.6 kHz, low-mid: 400 Hz, low: 100Hz). See more details in
LOW Settings
Factory defaults Restore the factory default settings on the microphone channel. For more details see
9
restore button Factory Default Settings.
Input volume fader Sets the volume of the input audio signal between -80dB and +10dB. It also can be
q
controlled by scrolling or writing the value in the text field.
Signal indicator See more details in
w
chart
e Mute/Unmute Mutes/unmutes the audio input.
Duck button This is a voice activation feature, allowing the volume of the voice of a person speaking
r
into the microphone to be automatically focused, and the volume of the rest of the
sounds to be lowered as soon as the presenter starts speaking.
Balance section Balance can be set in this section. For more details, see
t
#analogaudio #balance volume #advancedaudio
section.
Channel Presets
Gain Settings.
section.
Panorama or Balance Settings section.
Panorama or Balance
68
Digital
section.
Equalization (EQ)
Settings.