Lightware MMX8x4-HT Series User Manual page 115


  
8. LW3 Programmers' Reference
8.8.3.6. Set the Volume by Step Value - Volume down
This command decreases the volume in dB by one step on the fix value list (see the value list in the
Volume with Exact Value on the Emb. Audio In
Command and Response #volume
Ý CALL•/MEDIA/AUDIO/I11:volumeDown()
Ü m0•/MEDIA/AUDIO/I11:volumeDown()
Example
Ý CALL /MEDIA/AUDIO/I11:volumeDown()
Ü mO /MEDIA/AUDIO/I11:volumeDown
8.8.3.7. Set the Balance on the Emb. Audio In
Command and Response #balance
SET•/MEDIA/AUDIO/I11.Balance=<bal_set>
Ý
pw•/MEDIA/AUDIO/I11.Balance=<bal_set>
Ü
Parameters
Identifier Parameter description
<bal_set> Balance setting
Example
Ý SET /MEDIA/AUDIO/I11.Balance=L6
Ü pw /MEDIA/AUDIO/I11.Balance=L6
Audio sound will be transmitted to the left channel of the audio output.
INFO: L1 and R1 are near the center, L6 means the maximum left side, R6 means the maximum right side.
8.8.3.8. Set the Phase Invert on the Emb. Audio In
Command and Response
SET•/MEDIA/AUDIO/I11.InvertPhase=<invertphase_status>
Ý
pw•/MEDIA/AUDIO/I11.InvertPhase=<invertphase_status>
Ü
Parameters
<invertphase_status> true: Invert phase is on;
false: Invert phase is off.
section).
Parameter values
R1-R6: Right channel, value can be set between 1 and 6.
L1-L6: Left channel, value can be set between 1 and 6.
0: Center
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
MMX8x4-HT series – User's Manual
Example
Set the Ý SET /MEDIA/AUDIO/I11.InvertPhase=true
Ü pw /MEDIA/AUDIO/I11.InvertPhase=true
For more details about the Phase Invert feature see
8.8.3.9. Set the Duck on the Emb. Audio In
Command and Response
SET•/MEDIA/AUDIO/I11.Ducker=<duck_status>
Ý
pw•/MEDIA/AUDIO/I11.Ducker=<duck_status>
Ü
Parameters
<duck_status>
Example
Ý SET /MEDIA/AUDIO/I11.Ducker=true
Ü pw /MEDIA/AUDIO/I11.Ducker=true
For more details about the Duck function see
8.8.3.10. Set the Highpass Filter on the Emb. Audio In
Command and Response
SET•/MEDIA/AUDIO/I11.HPF=<hpf_status>
Ý
pw•/MEDIA/AUDIO/I11.HPF=<hpf_status>
Ü
Parameters
<hpf_status>
Example
Ý SET /MEDIA/AUDIO/I11.HPF=true
Ü pw /MEDIA/AUDIO/I11.HPF=true
For more details about the Highpass Filter see
Legend of Embedded or Advanced Input Channel
true: Duck function is on;
false: Duck function is off.
Legend of Embedded or Advanced Input Channel
true: Highpass filter is on;
false: Highpass filter is off.
Legend of Microphone Input Channel
115
section.
section.
section.