Presets - Lightware MX-FR Series User Manual

   
6. Software Control – Lightware Device Controller Software
6.5.5. Presets
Preset operations can be done in Crosspoint submenu on the Preset
tab. Dach Lightware matrix routers has 32 preset memories that can
be loaded and saved at any time.
INFO:
A preset setting stores a full configuration of all outputs, so
preset loading has an effect on every output, except the locked
ones.
A preset can be selected by pressing its button on the left. Preset
preview (on the right) will show the crosspoint settings of input and
output ports.
Loading a Preset
Step 1. Select the Presets tab from Crosspoint menu.
Step 2. Select the preset memory (Preset1... Preset32) you want to load.
Step 3. Press Load button below Preset preview list. Now the preset
is loaded.
Step 4. The new I/O configuration is displayed in Grid view.
Saving a Preset
Step 1. Make the desired crosspoint connections in Tile view or Grid
view.
Step 2. Select the preset memory (Preset1...Preset32) where you want
to save your current crosspoint connections.
Step 3. Press Save button below Preset preview list.
Step 4. A confirmation message is displayed on the information bar;
the preset is stored.
Renaming a Preset
Step 1. Select the preset memory (Preset1...Preset32) you want to
rename.
Step 2. Type the desired name and press Rename Preset button; the
new name is stored.
MX-FR Series Modular Matrix Frames – User's Manual
Presets Tab
73