Table of Contents
Advertisement
5. Software Control – Lightware Device Controller
6.13.4. Create and Restore Backups from the Device Memory
MMX8x4 series matrix is able to store backups in its own memory and can be recalled from there so user
does not need to save backup files to the local computer. Four slots are available for this purpose.
You can save presets as not protected with using Save button and as protected with using the Save as protected
button. Restoring a preset select on the slot of the desired backup and click on the Apply button. You can
save presets from a file from your local computer clicking on the Upload button and you can also save a
preset from the device's memory to a backup file with using the Download button. If you do not need a saved
preset any more, select it and click on the Delete button.
WARNING! Loading factory default settings will erase all presets which has been saved in the device
memory!
MMX8x4-HT series – User's Manual
6.14. The Built-in Miniweb
DEFINITION:
If the <IP_address>/index.html page is opened in a web browser the file is displayed.
ATTENTION!
installed in the device during the first firmware upgrade process by the user if the necessary parameter is
enabled. See the
The default control page allows the
▪
▪
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
The miniweb is a dedicated location in the memory where an HTML file can be uploaded to.
The Miniweb is available from firmware package v1.2.2. The default control page can
Check the upgrade parameters.
section.
followings:
Source selection: This block can be used to select an input or enable/disable the Autoselect remotely
e.g. from a mobile device.
Action triggers: The action trigger buttons can be used to perform a configured Event Action without
waiting for the condition to occur. This can be done remotely by a mobile device, too.
The Control Page Displayed in a Desktop Browser (with Action Trigger Buttons)
82
#builtinweb
#miniweb
#web
Advertisement
Table of Contents
Troubleshooting
