Send Cec Command In Text Format; Poe Enable; Signal Type Settings (Output Ports) - Lightware MMX8x4-HT Series User Manual


  
8. LW3 Programmers' Reference
Example
Ý SET /MEDIA/CEC/I1.OsdString=Lightware
Ü pw /MEDIA/CEC/I1.OsdString=Lightware
Ý CALL /MEDIA/CEC/I1:send(set_osd)
Ü mO /MEDIA/CEC/I1:send
8.5.19. Send CEC Command in Text Format
Ý CALL /MEDIA/CEC/<port>:send(<command>)
Ü mO /MEDIA/CEC/<port>:send
Parameters
Identifier Parameter description
<port> Port identifier
<command> CEC command
Example
Ý CALL /MEDIA/CEC/I5:send(play)
Ü mO /MEDIA/CEC/I5:send
Parameter values
I1-I8: Source port number.
O1-O5: Destination port number in MMX8x4-HT-400MC
and MMX8x4-HT-420M models.
O1-O8: Destination port number in MMX8x8-HDMI-4K-A.
image_view_on / standby
ok / back
up / down / left / right
root_menu / setup_menu / contents_menu / favorite_menu/
media_top_menu / media_context_menu
number_0 / number_1 / number_2 / number_3 / number_4 /
number_5 / number_6 / number_7 / number_8 / number_9 /
dot / enter / clear
channel_up / channel_down
sound_select / input_select
display_info / power_legacy
page_up / page_down
volume_up / volume_down
mute_toggle / mute / unmute
play/ stop/ pause / record / rewind / fast_forward / eject/
skip_forward/ skip_backward
3d_mode
stop_record / pause_record
play_forward / play_reverse
select_next_media / select_media_1/ select_media_2 /
select_media_3 /select_media_4 / select_media_5
power_toggle / power_on / power_off
f1 / f2 / f3 / f4 / stop_function
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
MMX8x4-HT series – User's Manual
8.5.19.1. Send CEC Command in Hexadecimal Format
Ý CALL /MEDIA/CEC/<port>:sendHex(<hex_code>)
Ü mO /MEDIA/CEC/<port>:sendHex
Parameters
<hex_code> Accepted command is max. 30 character long (15 byte) in hexadecimal format.
Example
Ý CALL /MEDIA/CEC/I5:sendHex(8700E091)
Ü mO /MEDIA/CEC/I5:sendHex
8.5.20. PoE Enable
INFO: This command is available in MMX8x4-HT420M model.
Command and Response
SET•/REMOTE/<tps_port>.PoeEnabled=<poe_status>
Ý
pw•/REMOTE/<tps_port>.PoeEnabled=<poe_status>
Ü
Parameters
Identifier Parameter description
<tps_port> TPS port number
<poe_status> PoE status
* TPS output ports are not available in MMX8x4-HT400MC model.
Example
Ý SET /REMOTE/S2.PoeEnabled=true
Ü pw /REMOTE/S2.PoeEnabled=true
8.5.21. Signal Type Settings (Output Ports)
Command and Response #signaltype
SET•/MEDIA/VIDEO/<out>.HdmiModeSetting=<signal_type>
Ý
pw•/MEDIA/VIDEO/<out>.HdmiModeSetting=<signal_type>
Ü
Example
Ý SET /MEDIA/VIDEO/O1.HdcpModeSetting=1
Ü pw /MEDIA/VIDEO/O1.HdcpModeSetting=1
Parameters
<signal_type> Signal type
Parameter values
S1-S4 for inputs
D1-D2* for outputs
true: PoE enabled
false: PoE disabled
0: Auto; 1: DVI; 2: HDMI
105