Aux Analog Audio Output Settings - Lightware MMX8x4-HT Series User Manual


  
8. LW3 Programmers' Reference
Parameters
<volume_dB> Volume can be set between -48.18dB and 0.00dB.
Example
Ý SET /MEDIA/AUDIO/I6/ADCVOLUME.VolumedB=-1
Ü pw /MEDIA/AUDIO/I6/ADCVOLUME.VolumedB=-1
8.7.2.3. Balance
Command and Response #balance
SET•/MEDIA/AUDIO/<in>/ADCVOLUME.Balance=<balance_value>
Ý
pw•/MEDIA/AUDIO/<in>/ADCVOLUME.Balance=<balance_value>
Ü
Parameters
<balance_value> The balance value can be set between -100 (left) and +100 (right). Zero balance
means the center setting.
Example
Ý SET /MEDIA/AUDIO/I6/ADCVOLUME.Balance=100
Ü pw /MEDIA/AUDIO/I6/ADCVOLUME.Balance=100
8.7.2.4. Gain
This command sets the input gain in dB scale.
Parameters
<gain_dB> The gain can be set between 0.00dB and 24.00dB.
Command and Response
SET•/MEDIA/AUDIO/<in>/ADCVOLUME.Gain=<gain_dB>
Ý
pw•/MEDIA/AUDIO/<in>/ADCVOLUME.Gain=<gain_dB>
Ü
Example
Ý SET /MEDIA/AUDIO/I6/ADCVOLUME.Gain=1.00
Ü pw /MEDIA/AUDIO/I6/ADCVOLUME.Gain=1.00
MMX8x4-HT series – User's Manual
8.7.3. AUX Analog Audio Output Settings
8.7.3.1. Mute
Command and Response
SET•/MEDIA/AUDIO/<in>.DACVOLUME.Mute=<mute_status>
Ý
pw•/MEDIA/AUDIO/<in>.DACVOLUME.Mute=<mute_status>
Ü
Parameters
<mute_status>
Example
Ý SET /MEDIA/AUDIO/I6/DACVOLUME.Mute=true
Ü pw /MEDIA/AUDIO/I6/DACVOLUME.Mute=true
8.7.3.2. Volume
This command sets the volume in dB
Command and Response
SET•/MEDIA/AUDIO/<in>/DACVOLUME.VolumedB=<volume_dB>
Ý
pw•/MEDIA/AUDIO/<in>/DACVOLUME.VolumedB=<volume_dB>
Ü
Example
Ý SET /MEDIA/AUDIO/I6/DACVOLUME.VolumedB=-1
Ü pw /MEDIA/AUDIO/I6/DACVOLUME.VolumedB=-1
Parameters
<volume_dB>
8.7.3.3. Balance
Command and Response
SET•/MEDIA/AUDIO/<in>/DACVOLUME.Balance=<balance_value>
Ý
pw•/MEDIA/AUDIO/<in>/DACVOLUME.Balance=<balance_value>
Ü
Example
Ý SET /MEDIA/AUDIO/I6/DACVOLUME.Balance=-100
Ü pw /MEDIA/AUDIO/I6/DACVOLUME.Balance=-100
Parameters
<balance_value>
means the center setting.
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
#mute #analogaudio
true: muted;
false: unmuted
scale. #volume
Volume can be set between -95.62dB and 0.00dB.
#balance
The balance value can be set between -100 (left) and +100 (right). Zero balance
108