Status Leds; Front Panel Lcd Menu Operations - Lightware MMX8x4-HT Series User Manual


  
3. Front Panel Control
3.1. Status LEDs
LIVE
blinking slow The unit is on and operates properly.
green
blinking fast The unit is in bootload mode.
green
off The matrix is out of operation.
POWER
green on Power LED indicates that the unit is powered on.
off The matrix unit is NOT powered or out of operation.
MMX8x4-HT400MC and MMX8x4-HT420M models
48V
on Phantom power is turned on.
red
off Phantom power is turned off.
TPS LEDs
PoE LED
off
amber blinking (1x) Refers to low signal resistance.
amber blinking (2x) Refers to high signal resistance.
amber blinking (5x) Indicates an overload fault.
amber on
TPS link LED
off
green blinking
green on
Remote power (PoE) is inactive, device is powered locally.
Remote power is active.
No TPS link between the transmitter and receiver.
Device is in low power mode or Ethernet fallback mode.
TPS signal is present.
MMX8x4-HT series – User's Manual
3.2. Front Panel LCD Menu Operations
The front panel has a color LCD that shows the most important settings and parameters structured in a
FRONT
menu. The jog dial control knob can be used to navigate between the menu items or change the value of a
parameter. The knob can be pressed to enter a menu or edit/set a parameter.
FRONT
REAR
REAR
Parameter Selection
The blue
the current setting.
TIPS AND TRICKS: The faster you rotate the jog dial, the faster the parameter list
is scrolled.
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
System Settings
Ports
EDID
Health
Crosspoint
colored line means the selected menu/parameter, the
19
Network
RS-232
Front panel
Device Info
Factory Defaults
Reset Device
Bootload Mode
I,O
Video Status
Video Settings
View
Switch
Save
Operation
Temperatures
Voltages
Switch
View
green one means