Lightware MMX8x4-HT Series User Manual page 113


  
8. LW3 Programmers' Reference
8.8.2.7. Set the Gain on the Advanced Analog In
Command and Response
SET•/MEDIA/AUDIO/I10.InputGain=<gain_value>
Ý
pw•/MEDIA/AUDIO/I10.InputGain=<gain_value>
Ü
Parameters
<gain_value> The gain value can be set between -12dB and +21dB, in step of 3.00dB. The value is rounded
down if necessary to match with the step value.
Example
Ý SET /MEDIA/AUDIO/I10.InputGain=1
Ü pw /MEDIA/AUDIO/I10.InputGain=1.00
8.8.2.8. Set the Phase Invert on Advanced Analog In
Command and Response
SET•/MEDIA/AUDIO/I10.InvertPhase=<invertphase_status>
Ý
pw•/MEDIA/AUDIO/I10.InvertPhase=<invertphase_status>
Ü
Parameters
<invertphase_status> true: Invert phase is on;
false: Invert phase is off.
Example
Ý SET /MEDIA/AUDIO/I10.InvertPhase=true
Ü pw /MEDIA/AUDIO/I10.InvertPhase=true
For more details about the Phase Invert feature see
8.8.2.9. Set the Highpass Filter on Advanced Analog In
Command and Response
SET•/MEDIA/AUDIO/I10.HPF=<hpf_status>
Ý
pw•/MEDIA/AUDIO/I10.HPF=<hpf_status>
Ü
Example
Ý SET /MEDIA/AUDIO/I10.HPF=true
Ü pw /MEDIA/AUDIO/I10.HPF=true
<hpf_status> true: Highpass filter is on.
false: Highpass filter is off.
For more details about the Highpass Filter see
Advanced Analog Input Channel section.
Legend of Microphone Input Channel section.
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
MMX8x4-HT series – User's Manual
8.8.2.10. Set the Lowpass Filter on Advanced Analog In
Command and Response
SET•/MEDIA/AUDIO/I10.LPF=<lpf_status>
Ý
pw•/MEDIA/AUDIO/I10.LPF=<lpf_status>
Ü
Parameters
<lpf_status> true: Lowpass filter is on.
false: Lowpass filter is off.
Example
Ý SET /MEDIA/AUDIO/I10.LPF=true
Ü pw /MEDIA/AUDIO/I10.LPF=true
For more details about the Lowpass Filter see
8.8.2.11. Equalizer (EQ) Settings on Advanced Analog In
Command and Response
SET•/MEDIA/AUDIO/I10.<eq_nr>Gain=<gain_value>
Ý
pw•/MEDIA/AUDIO/I10.<eq_nr>Gain=<gain_value>
Ü
Parameters
Identifier
<eq_nr> PEQ1: Low (100 Hz)PEQ2: Lmid (400 Hz)
PEQ3: Hmid: (1.6 kHz)
PEQ4: High: (8 kHz)
<gain_value> The EQ gain value can be set between -18dB and +18dB, in step of 3.00 dB. The value is rounded
down if necessary to match with the step value. For more details, see
Example
Ý SET /MEDIA/AUDIO/I10.PEQ1Gain=-16
Ü pw /MEDIA/AUDIO/I10.PEQ1Gain=-15.00
For more details, see Equalization (EQ)
Legend of Microphone Input Channel section.
Parameter values
Equalization (EQ)
Settings.
113
Settings.