Crosspoint Operations; Video Tab; Tps Input Port Properties - Lightware MMX8x4-HT Series User Manual


  
5. Software Control – Lightware Device Controller
6.4.1. Crosspoint Operations
Switching
To make a connection click on the desired square. If there is no connection
between the desired input and output (the square is dark grey), the mouse pointer
becomes a hand (link pointer) before the clicking. If the output port is not locked,
the connection is made, the square becomes white and the cursor changes back
to a pointer. #crosspoint #switch
For example, Input 8 is not connected to Output 1 as shown on the first picture. If
the connection is established the square becomes white.
Port Tiles
The colors of the port tiles and the displayed icons represent different states and
information:
HDMI OUT3 O3
1
A
2
State Indicators
Icon is grey
Icon
A
The port is unmuted
The port is unlocked
Signal is not encrypted
with HDCP
Icon Icon is grey
Autoselect setting is
A
disabled
1 Port name
3
4
2 Port icon
5
Port number
3
Signal status
4 (green: present; grey:
not present)
5 State indicators
Icon is black
The port is muted
The port is locked
Signal is encrypted with HDCP
Icon is green
Autoselect setting is enabled
MMX8x4-HT series – User's Manual
6.5. Video Tab
6.5.1. TPS Input Port Properties

DIFFERENCE:
#hdcp #lock #unlock #mute #unmute #portstatus #tpsmode #diagnostic #cablediagnostic #framedetector
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
MMX8x8-HDMI-4K-A and MMX8x8-HDMI-4K-A-USB20 models have no TPS port.
TPS Input Port Properties Window in MMX8x4-HT420M model
56