Presets - Lightware MX9x9DVI-Plus User Manual


  
6. Software Control – Lightware Device Controller Software
6.5.4. Presets
Preset operations can be done in Crosspoint submenu on the Preset tab.
Each Lightware matrix routers has 32 preset memories that can be
loaded and saved at any time.
INFO: A preset setting stores a full configuration of all outputs. The
preset loading has an effect on every output, except the locked
ones.
Preset Preview
A preset can be selected by pressing its button on the left. The Show
preview on crosspoint button will show the crosspoint of the input and
output ports.
Loading a Preset
Step 1. Select the Presets tab from Crosspoint menu.
Step 2. Select the preset memory (Preset1... Preset32) you want to load.
Step 3. Press the Load button; the preset is loaded.
Step 4. The new I/O configuration is displayed in Grid view.
Saving a Preset
Step 1. Arrange the desired crosspoint connections.
Step 2. Select the preset memory (Preset1...Preset32) where you want
to save your current crosspoint connections.
Step 3. Press Save button below Preset preview list.
Step 4. A confirmation message is displayed on the information bar;
the preset is stored.
MX DVI-Plus Series – User's Manual
Renaming a Preset
Step 1. Select the preset memory (Preset1...Preset32) you want to
rename.
Step 2. Type the desired name and press Rename Preset button; the new
name is stored.
The Presets Tab
30