Hashtag Keyword List - Lightware MMX8x4-HT Series User Manual


  
12. Appendix
12.11. Hashtag Keyword List
This user's manual contains keywords with hashtag (#) to help you to find the relevant information as quick
as possible.
The format of the keywords is the following:
The usage of the keywords: use the Search function (Ctrl+F / Cmd+F) of your PDF reader application, type the
#(hashtag) character and the wished keyword.
The #new special keyword indicates a new feature/function that has just appeared in the latest firmware or
software version.
Example
#dhcp
This keyword is placed at the DHCP (dynamic IP address) setting in the front panel operation, the Lightware
Device Controller (LDC) and the LW3 programmer's reference section.
The following list contains all hashtag keywords placed in the document with a short description belonging
to them. The list is in alphabetical order by the hashtag keywords.
Hashtag Keyword 
#advancedview
#terminal
#analogaudio
#balance
#volume
#advancedaudio
#mic
#microphone
#backup
#bootload
#buttonlock
#lockbutton
#gpio
#relay
#usb
#signaltype
#autoselect
#cec
#<keyword>
Description
Advanced view / Terminal window
Advanced view / Terminal window
Analog audio related settings
Balance (for analog audio) setting
Volume (for analog audio) setting
Advanced audio settings
Microphone settings
Microphone settings
Configuration cloning (backup)
Bootload mode setting
Front panel button lock setting
Front panel button lock setting
GPIO realted settings
Relay related settings
USB related settings
HDMI/DVI signal type setting
Autoselect feature settings
CEC related settings
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
MMX8x4-HT series – User's Manual
Hashtag Keyword 
#commandinjection
#configurationcloning
#crosspoint
#switch
#autotakemode
#dhcp
#ipaddress
#network
#diagnostic
#cablediagnostics
#edid
#eventmanager
#factory
#firmwareversion
#framedetector
#hdcp
#infra
#infrared
#label
#devicelabel
#producttype
#lock
#unlock
#mute
#unmute
#log
#systemlog
#message
#nosyncscreen
#testpattern
#portstatus
#protocol
#reboot
Description
RS-232 command injection settings
Configuration cloning (backup)
Crosspoint switch setting
Crosspoint switch setting
Autotake mode
Dynamic IP address (DHCP) setting
IP address related settings
Network (IP address) related settings
Failure diagnostic related tool/information
Cable diagnostics tool in LDC
EDID related settings
Event manager
Factory default settings
Firmware version query
Frame detector in LDC
HDCP-encryption related setting
Infrared port related settings
Infrared port related settings
Device label
Device label
Product type query
Port lock setting
Port unlock setting
Port mute setting
Port unmute setting
System log
System log
Message sending via communication
ports
Test pattern (no sync screen) settings
Test pattern (no sync screen) settings
Source/destination port status query
RS-232 protocol setting
Restarting the device
159