Lightware MMX8x4-HT Series User Manual page 26


  
3. Front Panel Control
Loading a Preset in Take Mode
Step 1. Press and release the Load preset button.
Step 2. Press and release the desired source (memory address) button (source 1 to 8).
Step 3. Press and release the Take button. Now the selected preset is loaded.
Saving a Preset in Autotake Mode
Step 1. Press and release the Save Preset button.
Step 2. Press and release the desired source (memory address) button (source 1 to 8). Now the current
configuration is stored in the selected memory.
ATTENTION! Preset save action always stores the current configuration for all outputs.
Loading a Preset in Autotake Mode
Step 1. Press and release Load Preset button.
Step 2. Press and release the desired source (memory address) button (source 1 to 8). Now the selected
preset is loaded.
MMX8x4-HT series – User's Manual
View Locked Outputs
View Locked State of an Output
Lock/Unlock an Output
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
26