Remote - Lightware MMX8x4-HT Series User Manual


  
8. LW3 Programmers' Reference
8.18.6. Remote
INFO: These commands are available in MMX8x4-HT400MC and MMX8x4-HT420M models.
The Remote node contains some basic status information about the Lightware device which is connected to
a TPS port of the matrix.
8.18.6.1. Query the Connection State of the Remote Device
This property indicates if the remote device connected or not.
Command and Response
Ý GET•/REMOTE/<port>.LinkState
pr•/REMOTE/<port>.LinkState=<link_state>
Ü
Parameters
<link_state> true: The remote device is connected
false: The remote device is not connected
Example
Ý GET /REMOTE/S2.LinkState
Ü pr /REMOTE/S2.LinkState=true
8.18.6.2. Query Connected Device
Command and Response
Ý GET•/REMOTE/<port>.ConnectedDevice
pr•/REMOTE/<port>.Conncected=<device_name>
Ü
Example
Ý GET /REMOTE/S2.ConnectedDevice
Ü pr /REMOTE/S2.ConnectedDevice=UMX-TPS-TX140
8.18.6.3. Connected IP Address
This property indicates if the remote device connected or not.
Command and Response
Ý GET•/REMOTE/<port>.RemoteIpAddress
pr•/REMOTE/<port>.RemoteIpAddress=<IP_address>
Ü
Example
Ý GET /REMOTE/S2.RemoteIpAddress
Ü pr /REMOTE/S2.RemoteIpAddress=192.168.0.105
MMX8x4-HT series – User's Manual
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
129