Opening The Miniweb; The Default Status Page; Miniweb Customization - Lightware MMX8x4-HT Series User Manual


  
5. Software Control – Lightware Device Controller
6.14.1. Opening the Miniweb
The Miniweb is available by:
Opening the web browser and typing the IP address of the desired device in the address line,
▪
▪ Launching the LDC, connecting to the device, navigating to Settings/Status and pressing the Open
miniweb button.
The Control Page Displayed in a Smartphone Browser
MMX8x4-HT series – User's Manual
6.14.2. The Default Status Page
If there is no control page uploaded, the default status page will be displayed (which is also available by
opening the <IP_address>/status.html address).
6.14.3. Miniweb Customization
The buttons of Action triggers section are linked to Actions of certain Events in the Event Manager. These
buttons are displayed only for specific events:
▪
▪
To add the desired Action as a button, append the name of the desired Event with the @W characters - see
below:
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
The Factory Default Status Page (status.html)
Any Event which does not have the @W suffix in its name will not be displayed as a trigger button.
The displayed trigger buttons will get a text label with the event name except the suffix.
Action Trigger Button added in the Event Manager and displayed in the Control Page
83