Lightware MMX8x4-HT Series User Manual page 137


  
9. Firmware Upgrade
Main Screen
When the software is started by the shortcut, the device discovery screen
appears. Press the Search for devices button to start finding the Lightware
devices:
If you start the software by double-clicking on the LFP2 file, the firmware will be loaded. Press the Search for devices
button; all the devices will be listed which are compatible with the selected firmware pack.

INFO: If you press the Select firmware package button, the release notes of the LFP2 file will be displayed in the
right panel; see the Select the Firmware Package.
SEARCH FOR DEVICES
section.
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
MMX8x4-HT series – User's Manual
Device List
When the discovery has completed, the devices available on the network are listed in the application.
Legend of the Icons
IP address editor

Identify me

Favorite device
 
Further information

available
The IP address of the device can be changed in the pop-up window.
Clicking on the icon results the front panel LEDs blink for 10 seconds
which helps to identify the device physically.
The device has been marked, thus the IP address is stored. When a device is
connected with that IP address, the star will highlighted in that line.
Device is unreachable. Change the IP address using the
front panel LCD menu or the IP address editor of the LDU2.
137