Lightware MMX8x4-HT Series User Manual page 132


  
8. LW3 Programmers' Reference
Set the Gain on the Advanced Analog In
SET•/MEDIA/AUDIO/I10.InputGain=<gain_value>
Ý
Set the Phase Invert on Advanced Analog In
SET•/MEDIA/AUDIO/I10.InvertPhase=<invertphase_status>
Ý
Set the Highpass Filter on Advanced Analog In
SET•/MEDIA/AUDIO/I10.HPF=<hpf_status>
Ý
Set the Lowpass Filter on Advanced Analog In
SET•/MEDIA/AUDIO/I10.LPF=<lpf_status>
Ý
Equalizer (EQ) Settings on Advanced Analog In
SET•/MEDIA/AUDIO/I10.<eq_nr>Gain=<gain_value>
Ý
Set the Audio Channel
SET•/MEDIA/AUDIO/I11.AudioSource=<in><a_v>
Ý
Query the Sampling Frequency
Ý GET•/MEDIA/AUDIO/<in>.SamplingFreq
Mute the Emb. Audio In
SET•/MEDIA/AUDIO/I11.Mute=<mute_status>
Ý
Set the Volume with Exact Value on the Emb. Audio In
SET•/MEDIA/AUDIO/I11.Volume=<volume_dB>
Ý
Set the Volume by Step Value - Volume up
Ý CALL•/MEDIA/AUDIO/I11:volumeUp()
Set the Volume by Step Value - Volume down
Ý CALL•/MEDIA/AUDIO/I11:volumeDown()
Set the Balance on the Emb. Audio In
SET•/MEDIA/AUDIO/I11.Balance=<bal_set>
Ý
Set the Phase Invert on the Emb. Audio In
SET•/MEDIA/AUDIO/I11.InvertPhase=<invertphase_status>
Ý
Send CEC Command in Text Format
Ý CALL /MEDIA/CEC/<port>:send(<command>)
Send CEC Command in Hexadecimal Format
Ý CALL /MEDIA/CEC/<port>:sendHex(<hex_code>)
PoE Enable
SET•/REMOTE/<tps_port>.PoeEnabled=<poe_status>
Ý
MMX8x4-HT series – User's Manual
Signal Type Settings (Output Ports)
SET•/MEDIA/VIDEO/<out>.HdmiModeSetting=<signal_type>
Ý
Test pattern generator mode setting
SET•/MEDIA/VIDEO/<out>.TpgMode=<tpg_mode>
Ý
Clock source – the clock frequency of the test pattern
SET•/MEDIA/VIDEO/<out>.TpgClockSource=<tpg_clocksource>
Ý
Test pattern
SET•/MEDIA/VIDEO/<out>.TpgPattern=<pattern>
Ý
Set the Duck on the Emb. Audio In
SET•/MEDIA/AUDIO/I11.Ducker=<duck_status>
Ý
Set the Highpass Filter on the Emb. Audio In
SET•/MEDIA/AUDIO/I11.HPF=<hpf_status>
Ý
Set the Lowpass Filter on the Emb. Audio In
SET•/MEDIA/AUDIO/I11.LPF=<lpf_status>
Ý
Equalizer (EQ) Settings on the Emb. Audio In
SET•/MEDIA/AUDIO/I11.<eq_nr>Gain=<gain_value>
Ý
Mute the Analog Audio Out
SET•/MEDIA/AUDIO/O6.Mute=<mute_status>
Ý
Set the Volume with Exact Value on Analog Audio Out
SET•/MEDIA/AUDIO/O6.Volume=<volume_dB>
Ý
Set the Volume by Step Value - Volume up
Ý CALL•/MEDIA/AUDIO/O6:volumeUp()
Set the Volume by Step Value - Volume down
Ý CALL•/MEDIA/AUDIO/O6:volumeDown()
Set the Balance on Analog Audio Out
SET•/MEDIA/AUDIO/O6.Balance=<bal_set>
Ý
Set the Phase Invert on Analog Audio Out
SET•/MEDIA/AUDIO/O6.InvertPhase=<invertphase_status>
Ý
Set the Mono Function on Analog Audio Out
SET•/MEDIA/AUDIO/O6.Monomix=<mono_status>
Ý
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
132