Hdmi And Tps Output Port Properties - Lightware MMX8x4-HT Series User Manual


  
5. Software Control – Lightware Device Controller
6.5.3. HDMI and TPS Output Port Properties

DIFFERENCE: MMX8x8-HDMI-4K-A and MMX8x8-HDMI-4K-A-USB20 models have no TPS port.
TPS Output Port Properties Window
MMX8x4-HT series – User's Manual
Available Settings
#diagnostic #framedetector #autoselect #nosyncscreen #testpattern
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
*TPS related settings can be found only in TPS output properties window.
Analog audio settings
The displayed configurable settings depends on the chosen audio mode. For more details see
Input Settings #analogaudio #balance #volume
No sync screen
Configuration settings of the test pattern. See more details in the
section.
Status and Signal Info
It gives a feedback about the current parameters the of the video signal:
▪
▪
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
# #hdcp #lock #unlock #mute
Port name
Mute/unmute the port;
Lock/unlock the port;
Autoselect settings (Enabled / Disabled, Mode and Priorities) See more details about this feature in
The Autoselect Feature section.
Pay attention for the following settings for the proper operation of Autoselect function:
– Set the Autoselect settings to Enabled;
– Be sure that no input is set to the same priority number;
– Be sure that all priority values are filled in (no empty space);
– Be sure that all inputs are enabled with the green checkbox on the right side;
– Always click on the Set priorities button after the changes to launch the new settings.
Signal type (Auto / DVI / HDMI);
HDCP mode (Auto / Always): The matrix forces the source sent the signal without encryption if the
content allows when Auto mode is selected.
PWR5V mode (Auto / Always on / Always off): The setting lets the source and the sink devices be
connected – independently from the transmitted signal;
Audio mode (only in O2 and O4 ports of MMX8x8-HDMI-4K-A model);
TPS mode* (Auto / HDBaseT / Longreach / LPPF1 / LPPF2 ). See more details about this setting in
section.
PoE setting* (enable / disable): The matrix is able to supply (send remote power) devices through the
TPS input and output ports which are compatible with the PoE standard.
Cable Diagnostics (in TPS port)*; For more details see
#analogaudio #balance #volume
section.
#portstatus
Monitor Present / Signal present / Signal type / HDCP / Hotplug detect
Resolution / Scan / Color depth / Color space
60
#unmute #portstatus #tpsmode
Cable Diagnostics section.
Analog Audio
Test Pattern Generator - No Sync Screen