Maintenance manual
GMK5250L
Checking the connecting terminals
•
Keep the batteries clean and dry.
•
Remove any dirty connecting terminals (1)
and clean them.
•
Fasten any loose connecting terminals.
•
Grease the connecting terminals and poles
lightly with a special battery terminal
grease.
Checking the acid level
Batteries without caps (1) are maintenance-
free.
•
Remove all caps (1).
The acid level must be above the plates.
If the acid level is too low
•
Top it up using only distilled water until the
plates are covered.
•
Tightly bolt on all caps (1).
After checking
•
Push the battery box in.
•
Switch on the battery master switch (1);
à
Operating manual .
•
Check the timers on the tachograph and on
the auxiliary heater;
•
Enter the code for the radio;
operating manual .
3 302 744 en
Maintenance work on the carrier
7.17 Electrical system
à
Operating manual .
à
Separate
7 - 125
Need help?
Do you have a question about the Grove GMK 5250L and is the answer not in the manual?
Questions and answers